RP7410

[Jon Steele]

I have an rp7410 with 2 cell boards configured exactly the same.Both cell boards show what they have on them.I get this message when I try and run parmgr ,it adds the second cell board to the partion but this is what comes up.
Warning
name:Horscroll bar
class:Xm scroll bar
The specified slider size is less than 1
The scrollbar page increment is less than 1

Warning
name:vert scrollbar
class:Xm scrollbar
the specified slider sixe is less than 1
The scrollbar page increment is less than 1

I have never seen this before,has anyone come across this?

Thanks for your help
Jon

[Andrew Rutter · Accepted solution]

hi jon,

Ive never actually seen it before but have heard about similar things.

Its basically a Java warning/error/bug.

depending upon the browser your using I would check for java updates.

Andy

[Sameer_Nirmal]

Hi Jon,

It is a known bug in Sun Java2 which was observed upto 1.4.2.08.

You need to install new version of Java2 (SDK and RTE) 1.4.2.10 available at
http://www.hp.com/products1/unix/java/?jumpid=go/java

At the explorer end , ensure you have latest Java plug-in installed.

You might want to take a look at
http://www.docs.hp.com/en/PARMGR2/index.html

[Jon Steele]

Thank you for your help.
Jon