HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

(RP7440) no power LED attention after BPS failure.urgent!!

 
Highlighted
Hui Liu
Occasional Contributor

(RP7440) no power LED attention after BPS failure.urgent!!

We have two RP7440s in customer site.
Last week, both of them had one BPS failure(from MP log and CM>PS).
But, we found that the LEDs-"POWER" of both servers are normal GREEN. We got no attention cue from the front panel.
Why no attention LED light(yellow/red) after BPS failure?
attched files are the MP log.

Thanks for your reply in advance.
3 REPLIES 3
Prashanth.D.S
Honored Contributor

Re: (RP7440) no power LED attention after BPS failure.urgent!!

Hi Hui,

Have you checked the firmware version ? That could be one reason.

Best Regards,
Prashanth
Hui Liu
Occasional Contributor

Re: (RP7440) no power LED attention after BPS failure.urgent!!

We use the version 1.2 as below and upgraded at the end of YR2007:

VERSION:
rp8440/rp7440 and SEU (AB301A) Firmware Version 1.2

Programmable Hardware:
System Backplane GPM 001.002.000
System Backplane EMMUX 001.000.000
IO Backplane IO_LPM-0 001.003.000
IO Backplane IO_LPM-1 001.003.000
Core IO CIO 001.002.000
Cell_LPM 001.002.000
Cell_JTAG 001.002.000
Cell_PDH 001.005.001

Firmware:
Core IO MP B.002.005.012
Core IO ED 002.007.000
Cell PDHC B.023.003.038
Cell PDC_FW 043.006.000
Prashanth.D.S
Honored Contributor

Re: (RP7440) no power LED attention after BPS failure.urgent!!

Hi Hui,

Am sorry couldnt find any fixes in the next version of firmware. Strange behaviour!! I would suggest you to reset the MP with XD command at MP prompt and monitor if this issue occurs.

If you donot find a fault LED indication for any further HW Fault on the box recommend you to involve HP Hardware team to look into the issue.

Best Regards,
Prashanth