(RP7440) no power LED attention after BPS failure.urgent!!

[Hui Liu]

We have two RP7440s in customer site.
Last week, both of them had one BPS failure(from MP log and CM>PS).
But, we found that the LEDs-"POWER" of both servers are normal GREEN. We got no attention cue from the front panel.
Why no attention LED light(yellow/red) after BPS failure?
attched files are the MP log.

Thanks for your reply in advance.

[Prashanth.D.S]

Hi Hui,

Have you checked the firmware version ? That could be one reason.

Best Regards,
Prashanth

[Hui Liu]

We use the version 1.2 as below and upgraded at the end of YR2007:

VERSION:
rp8440/rp7440 and SEU (AB301A) Firmware Version 1.2

Programmable Hardware:
System Backplane GPM 001.002.000
System Backplane EMMUX 001.000.000
IO Backplane IO_LPM-0 001.003.000
IO Backplane IO_LPM-1 001.003.000
Core IO CIO 001.002.000
Cell_LPM 001.002.000
Cell_JTAG 001.002.000
Cell_PDH 001.005.001

Firmware:
Core IO MP B.002.005.012
Core IO ED 002.007.000
Cell PDHC B.023.003.038
Cell PDC_FW 043.006.000

[Prashanth.D.S]

Hi Hui,

Am sorry couldnt find any fixes in the next version of firmware. Strange behaviour!! I would suggest you to reset the MP with XD command at MP prompt and monitor if this issue occurs.

If you donot find a fault LED indication for any further HW Fault on the box recommend you to involve HP Hardware team to look into the issue.

Best Regards,
Prashanth