HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RP8400 cell boards to BPU's

 
SOLVED
Go to solution

RP8400 cell boards to BPU's

I have 4 cell boards in our RP8400 and 5 BPU's for a "N+1" redundent config and all 4 power connections are connected. The weird part is that I am getting messages in syslog that the BPU's are not redundent and wants that 6th BPU in.
also in looking at the manual (http://www.docs.hp.com/en/A6093-96022/ch05s01.html)it states that if you have 2 cell boards you need 4 BPU's for a n+1. my math may be week but last I checked 2+1=3 not 4.
HELP me clean my syslog.
alex dallas
6 REPLIES 6
Torsten.
Acclaimed Contributor

Re: RP8400 cell boards to BPU's

This is the rule: for n+1 redundancy with 4 cells you need 6 BPS'.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sandy Chen
Honored Contributor
Solution

Re: RP8400 cell boards to BPU's

Hi Alex,

You will need 6 BPS, I attached a part of rp84xx documentation about the BPU

Regards,
Sandy
I never think of the future. It comes soon enough.

Re: RP8400 cell boards to BPU's

that is what I figured but I was tripping on the n+1 where I thought
n = "number of cell boards"
so 4+1=?6?
Torsten.
Acclaimed Contributor

Re: RP8400 cell boards to BPU's

"n+1 redundancy" **always** means one more than needed - 1 can fail and you have still enough to keep it working.
This not only applies to this part ;-)

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: RP8400 cell boards to BPU's

closing thread
timber
Occasional Advisor

Re: RP8400 cell boards to BPU's

A simple rule about rp84xx cell and BPS :
for N+1 redundent : BPS num= X+2(x=cell num)
for N(not redundent):BPS num=X+1(x=cell num)
May Force be with you !