RP8400

[Malone]

Hi ,
i have this problem on my rp8400.

# Location Alert Keyword Timestamp
194 PDC 0,1,0 *6 0x180043600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
194 PDC 0,1,0 *6 0x58004b0000006310 0x00006c0b0b122f35 12/11/2008 18:47:53
193 PDC 0,1,0 *6 0x180042600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
193 PDC 0,1,0 *6 0x58004a0000006310 0x00006c0b0b122f35 12/11/2008 18:47:53
192 PDC 0,1,0 *6 0x180047600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
192 PDC 0,1,0 *6 0x58004f0000006310 0x00006c0b0b122f34 12/11/2008 18:47:52
191 PDC 0,1,0 *6 0x180045600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
191 PDC 0,1,0 *6 0x58004d0000006310 0x00006c0b0b122f1f 12/11/2008 18:47:31
190 PDC 0,1,0 *6 0x180044600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
190 PDC 0,1,0 *6 0x58004c0000006310 0x00006c0b0b122f1f 12/11/2008 18:47:31
189 PDC 0,1,0 *6 0x180046600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
189 PDC 0,1,0 *6 0x58004e0000006310 0x00006c0b0b122d31 12/11/2008 18:45:49
188 PDC 0,1,0 *6 0x180042600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
188 PDC 0,1,0 *6 0x58004a0000006310 0x00006c0b0b122d00 12/11/2008 18:45:00
187 PDC 0,1,0 *6 0x180041600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
187 PDC 0,1,0 *6 0x5800490000006310 0x00006c0b0b122d00 12/11/2008 18:45:00
186 PDC 0,1,0 *6 0x180046600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
186 PDC 0,1,0 *6 0x58004e0000006310 0x00006c0b0b122d00 12/11/2008 18:45:00
185 PDC 0,1,0 *6 0x180044600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
185 PDC 0,1,0 *6 0x58004c0000006310 0x00006c0b0b122c26 12/11/2008 18:44:38
184 PDC 0,1,0 *6 0x180043600000631c 0x1200000080000200 ERR_DNA_PRI_HEALTH
184 PDC 0,1,0 *6 0x58004b0000006310 0x00006c0b0b122c26 12/11/2008 18:44:38
MP:VWR (,,+,-,D,F,L,J,V,H,^B) >

from the VFP output :

1 partition booting 1083 logs

and nothing more.
Sure the partition can't boot.
Any Idea?
thx Max

[cnb]

Cell 1 is reporting an error condition in the system. *6 indicates boot possible pending failure or environmental condition. Go back in the logs to find the first occurance and the error(s) prior to that. Post those errors.

HTH,

[Andrew Rutter]

hi,

This means that the PDC is logging errors between the primary and secondary logging modes.

See this link and scroll down to event number 1696

http://docs.hp.com/en/diag/ems/fpl_em.htm

I cant help with decoding the chassis log data fields further but Hp can. Time to log a call

Andy

[Prashanth.D.S]

Hi,

How many npars configured ? Are you not able to boot the partition atall ? I can see the errors are from Cabinet 0 Cell 1 CPU 0..

Can you send the following output from MP ??

MP:CM>ps
Select Device: t

MP:CM>ps
Select Device: c

Check for any failure on either of these logs..

Best Regards,
Prashanth

[Malone]

MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+-----+-------+-------+-----------+
| | | | | | |
| | | Sys | | IO | Bulk Pwr |
|Cab| MP |Bkpln| Cells |Chassis| Supplies |
| # |M S| |0 1 2 3| 0 1 |0 1 2 3 4 5|
+---+----+-----+-------+-------+-----------|
| 0 |* | * |* * | * * |* * * * |
+---+----+-----+-------+-------+-----------+

You may display detailed power and hardware status for the following items:

T - Cabinet
S - System Backplane
G - MP (Core I/O)
P - IO Chassis
C - Cell
Select Device: t

HW status for rp8400 cabinet : NO FAILURE DETECTED

Power switch is on
Right Door is closed
Top Door is open
Left Door is closed

Total Power Available 4000 VA
Total Power Needed 2532 VA
Power Redundancy : redundant
Power Viability : viable


Power Status
---------------+-----+-------+-------+-----------+
| | | | |
| Sys | | IO | Bulk Pwr |
|Bkpln| Cells |Chassis| Supplies |
| |0 1 2 3| 0 1 |0 1 2 3 4 5|
---------------+-----+-------+-------+-----------|
Populated | * |* * | * * |* * * * |
Enabled | * |* * | * * |* * * * |
Power OK | * |* * | * * |* * * * |
Warning/Fault | | | | |
Attention LED | | | | |


AC Line status:
Line A0 Present
Line B0 NOT PRESENT
Line A1 Present
Line B1 NOT PRESENT

-- Press to continue, or 'Q' to Quit --

Front Fan Speed : normal
Rear Fan speed : normal
I/O Bay Fan Speed : high
Temperature state : normal
Fan Redundancy : redundant
Overtemp Shutdown Enabled


| BPS | PCI |
| Fans | Fans |
| 0 1 2 3 4 5 | 0 1 2 3 4 5 |
+-----------+-------------+-------------+
Populated | * * * * | * * * * * * |
Failing | | |
Failed | | |

| Standby/Main Fans |
| 1 1 1 1 1 1 1 1 1 1 2 |
| 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 |
+-----------+-------------------------------------------+
Populated | * * * * * * * * * * * * * * * * * * * * * |
Failing | |
Failed | |

| Cell Fans |
| 0 1 2 3 4 |
+-----------+-----------+
Cell 0 | |
Populated | * * * |
Failing | |
Failed | |
Cell 1 | |
Populated | * * * |
Failing | |
Failed | |

MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+-----+-------+-------+-----------+
| | | | | | |
| | | Sys | | IO | Bulk Pwr |
|Cab| MP |Bkpln| Cells |Chassis| Supplies |
| # |M S| |0 1 2 3| 0 1 |0 1 2 3 4 5|
+---+----+-----+-------+-------+-----------|
| 0 |* | * |* * | * * |* * * * |
+---+----+-----+-------+-------+-----------+

You may display detailed power and hardware status for the following items:

T - Cabinet
S - System Backplane
G - MP (Core I/O)
P - IO Chassis
C - Cell
Select Device: c
Enter cell number: 0

HW status for Cell 0 : NO FAILURE DETECTED

Power status : on, no fault
Boot is not blocked
PDH memory is shared
RIO cable status : connected
RIO cable connection physical location : IO Chassis 0
Core cell is cell 0
Attention Led is off

PDHC status Leds : ****

0 1 2 3
CPUs Populated * *

DIMMs populated:
0 . . . 4 . . . 8 . . .12 . . .
* * * *

1 1 1
VRM's 1 2 3 4 5 6 7 8 9 0 1 2
Present : * * * * * * * * * * *
Enabled : * * * * * * * * * * * *
Pwr Good : * * * * * * * * * * *


Cell Board DIP Switches : b'00000011
Clock type : Piranha_pll
Frequency Select reg : 0x13
CPU Clock Select : System Backplane Clock @ 130 MHz
CPU PLL : Enabled
CPU VREF control : Ground
CPU Type : PA8700
CPU Speed Bits : 0xf
Dip switch settings are valid

System Boot Rom (PDC) firmware rev 17.009
PDH controller (PDHC) firmware rev 2.04, built MON JAN 12 18:20:02 2004
IceBoy revision is 1.0

MP:CM>

[cnb]

"You may display detailed power and hardware status for the following items:

T - Cabinet
S - System Backplane
G - MP (Core I/O)
P - IO Chassis
C - Cell
Select Device: c
Enter cell number: 0

HW status for Cell 0 : NO FAILURE DETECTED"

What about Cell 1? You need to check the status for cell 1.

HTH,

[Sherif A. Louis]

this seems like an Cell controller issue (DNA) and CPU 0 is the reporting entity which is probably the monarch CPU. what's ur complex configuration? which cells in which partitions?

[Malone]

MP:CM> cp

--------------
Cabinet | 0 |
--------+----+
Slot |0123|
--------+----+
Part 0 |*...|
Part 1 |.*..|

MP:CM>