Re : L3000 server

[Vincent_5]

Hi Guys,
Can someone advice if a 146GB harddisk can be install on a L3000 and what is the firmware version require.


Regards
Vincent

[Pete Randall]

Vincent,

I don't think so - the largest I see is:

A6091A
73GB hot-plug Ultra2 SCSI hard drive - 10,000 RPM, half height


Pete

[Patrick Wallek]

http://partsurfer.hp.com only goes up to a 73GB (A6091A) drive for the L3000 and the rp5470.

That doesn't mean it won't work though. I would think you should be able to do it.

[Pedro Cirne]

Hi Vicent,

You may check that on:

http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=c00288650#drive

And yes, it's possible!

Enjoy :)

Pedro

[Torsten.]

Hi Vincent,

the largest supported hard disk is 73GB.
Have a look:

http://partsurfer.hp.com

Regards
Torsten

[Torsten.]

The incredible Pedro!

Be sure to have PDC version 44.12 - always a good idea to have the current one.

[Pedro Cirne]

Hi Folks,

On the link I mentioned on my previous post, the 146Gb hard disk is mentioned....but in the partsurfer web site it is not.

Better to check with HP directly mentioning that, otherwise the sales guy will look at partsurfer and say NO!

Enjoy :)

Pedro

[Jeff Schussele]

Hi,

One thing to consider about *any* drive you want to install in an L-class is RPM
15K RPM drives are *not* supported in an L-class due to the heat they generate. Only up to 10K RPM drives are supported.

My 2 cents,
Jeff