HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Re : Quires on Rp3440

 
Vincent_5
Super Advisor

Re : Quires on Rp3440

Hi,
How can I see the boot up sequence on the Rp3440 through serial console port. When I link up, using hyperterm I'm directed to MP login and after login, when I start console i can only see the PDC relocating onwards how come I cannot see the hardware test portion ?? please advice


Regards
Vincent
nothing is better than to know more
3 REPLIES 3
Olivier Decorse
Respected Contributor

Re: Re : Quires on Rp3440

When connect to the MP, you can see everything : PDC, hardtest, etc.
From hyperterm, just shutdown (-r -y 0) your server. You will see the shutdown sequence, and then, you will normaly arrive to the boot sequence.

Olivier.
They say "install windows 2k, xp or better", so i install unix !
Jannik
Honored Contributor

Re: Re : Quires on Rp3440

on a keystone rp8400 it looks like this:
MP MAIN MENU:

CO: Consoles
VFP: Virtual Front Panel (partition status)
CM: Command Menu
CL: Console Logs
SL: Show chassis Logs
HE: Help
X: Exit Connection

MP>

then type vfp like this:
MP> vfp

PARTITION STATUS: E indicates error since last boot
Partition 0 state Activity
------------------ --------
HPUX heartbeat: *

# Cell state Activity
- ---------- --------
0 Cell has joined partition
2 Cell has joined partition

and it will look like the above, i don't know for you specific hardware...
jaton
Cheryl Griffin
Honored Contributor

Re: Re : Quires on Rp3440

You can reward the many people who have assisted you by assigning points to their posts.

For steps how to assign points see:
http://forums1.itrc.hp.com/service/forums/helptips.do?#33
"Downtime is a Crime."