HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Re : unable to configure MTZ modem on remote port of rp3410

 
Highlighted
Vincent_5
Super Advisor

Re : unable to configure MTZ modem on remote port of rp3410

Hi guys,
Can anyone help, I'm trying to connect a modem on the remote port of the RP3410, but it seems like the remote port is not ready and cannot receive call. please advice how can I go about configuring the remote port to work???

REgards
Vincent
nothing is better than to know more
2 REPLIES 2
Patrice Le Guyader
Respected Contributor

Re: Re : unable to configure MTZ modem on remote port of rp3410

Hi,

You can try to get it's status in the MP :
when you are in the
Type to access command menu :
Type CA to access to the configure asynch/serial ports menu :
(+)type D for display Local/Remote Serial Port Configuration
(+) type L for modify Local Serial Port Configuration
(+)type R to modify Remote/Modem Serial Port Configuration
or Type MS to get the modem Status
or Type MR to Reset the Modem

Otherwise look at this thread :
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=617139

Hope this helps
Pat
Good judgement comes with experience. Unfortunately, the experience usually comes from bad judgement.

Re: Re : unable to configure MTZ modem on remote port of rp3410

Hi Vincent,
I have a nice doku for modemconfiguration.

I hope it helps you.

Regards,
Mirko