HPE 9000 and HPE e3000 Servers
1753804 Members
7472 Online
108805 Solutions
New Discussion юеВ

Reboot after panic:,isr.ior

 
Tay Siew Yong
New Member

Reboot after panic:,isr.ior

I have a HP Unix Visualise j6000 that self reboot a few times in a day. I check /var/tomstone/ts99 file but not found. I obtain the following messages via analyse the crash dumps using q4:
stack trace for event 0
crash event was an HPMC
can't find unwind or stub descriptor for pc==0xc00899b0
stack trace for event 0
crash event was an HPMC
idle+0x378
stack trace for event 0
crash event was an HPMC
can't find unwind or stub descriptor for pc==0xc1b94514
stack trace for event 0
crash event was an HPMC
can't find unwind or stub descriptor for pc==0xc0a89888
stack trace for event 0
crash event was an HPMC
can't find unwind or stub descriptor for pc==0xc09e0508
I suspect that is the hardware problem. How can I find out which part of hardware having problem?
Thanks a lot.
2 REPLIES 2
Cheryl Griffin
Honored Contributor

Re: Reboot after panic:,isr.ior

Hardware Support can assist you with this issue.
"Downtime is a Crime."
Robert-Jan Goossens
Honored Contributor

Re: Reboot after panic:,isr.ior

Hi,

Call your HP support center and log a hardware call for your J6000.

Best regards,
Robert-Jan