HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Reboot after panic (rp5470 HPUX 11.11)

 
Jose_129
Regular Advisor

Reboot after panic (rp5470 HPUX 11.11)

I have the message in console and reboot of server:

180 PDC 0,0,2 *7 05/29/2005 16:20:28
Log Entry 180: 05/29/2005 16:20:28
Alert Level 7: HPMC; Keyword:
Status: 2
Logged by system firmware 2 during machine check subActivity 29
0x0000227000ff6292 0x000000007fa00000
0x58002a7000ff6292 0x000069041d10141c

Regards,

Jos
Change password in way single user, beginning in multiuser way console
6 REPLIES 6
Steven E. Protter
Exalted Contributor

Re: Reboot after panic (rp5470 HPUX 11.11)

A Major piece of hardware has failed.
HPMC
High
Priority
Machine
Check

A CPU or something has gone down. You need to boot, interupt the boot and run the hardware diagnostics.

If the machine does reboot to OS then run mstm/cstm or mstm and find the missing component. If its a CPU that should be pretty easy.

Then get hardware out to service the machine.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Sยภเl Kย๓คг
Respected Contributor

Re: Reboot after panic (rp5470 HPUX 11.11)

This should be an Hardware failure, contact HP CE
Your imagination is the preview of your life's coming attractions
Highlighted
Mohanasundaram_1
Honored Contributor

Re: Reboot after panic (rp5470 HPUX 11.11)

Jose,

As others indicated, HPMC means an hardware has encountered error. HP is the right source decode it.

However, Your system should be up and running now. Please post the /var/tombstones/ts99 file from the server here. This should contain the HPMC information.

With regards,
Mohan.
Attitude, Not aptitude, determines your altitude
Jose_129
Regular Advisor

Re: Reboot after panic (rp5470 HPUX 11.11)

Attach ts99,

Please any information of ts99

Regards,

Jose
Change password in way single user, beginning in multiuser way console
Bharat Katkar
Honored Contributor

Re: Reboot after panic (rp5470 HPUX 11.11)

Hi There,
It's time to call your HP Engineer.
Regards,
You need to know a lot to actually know how little you know
Mohanasundaram_1
Honored Contributor

Re: Reboot after panic (rp5470 HPUX 11.11)

HI Jose,

What is the IO card on slot 12 on this system? This is the top most slot of the system. The hardware path is 0/10/0.

Please check if you have loaded all the latest patches specific to this IO card. If you are sure all patches are in place, then it is time to suspect the card or slot.

I would first check for patches then replace the card on that slot.If problem persists, the slot is the suspect.

Do get back to us.

With regards,
Mohan.
Attitude, Not aptitude, determines your altitude