HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Remote Console Poblem

 
Vick10
Advisor

Re: Remote Console Poblem

# cat /tmp/info.log |grep -i pdc
PDC Firmware Revision: 44.12 IODC Revision: 0
------- Processor 0 HPMC Information - PDC Version: 44.12 ------
PDC Firmware Revision: 44.12 IODC Revision: 0
------- Processor 2 HPMC Information - PDC Version: 44.12 ------
cnb
Honored Contributor

Re: Remote Console Poblem

Hi Vick,

PDC is the latest.

Can you post the Console Log from the last boot session that shows the console paths? Are your h/w console paths set correctly? Which version of GSP do you have A6696A or A6696B (cntl b, HElp will display GSP version)?

The A6696A uses:
0/0/4/0.0 Console
0/0/4/0.1 UPS
0/0/4/0.2 Remote (modem)

A6696B:
0/0/4/1.0 Console
0/0/4/1.1 UPS
0/0/4/1.2 Remote (modem)

GSP LAN (both):
0/0/5/0

The O/S should see these devices:

# ioscan -fnC tty
Class I H/W Path Driver S/W State H/W Type Description
==================================================================
tty 0 0/0/4/0 asio0 CLAIMED INTERFACE PCI Serial (103c1048)
/dev/GSPdiag1 /dev/mux0 /dev/tty0p1
/dev/diag/mux0 /dev/tty0p0 /dev/tty0p2
tty 1 0/0/5/0 asio0 CLAIMED INTERFACE PCI Serial (103c1048)
/dev/GSPdiag2 /dev/mux1
/dev/diag/mux1 /dev/tty1p1

/0/0/4/0 is the Console
/0/0/5/0 is the GSP LAN

IMHO it *looks* like your using the A6696B GSP and the terminal paths might not be right. Devices tty0 not assigned, tty1 using the A6696B settings and I don't see the GSP devices assigned. However, I'm referencing an L3000 with an A6696A GSP and they *should* be similar to the L1500, but I don't have one to verify this on.

Anyone please jump in and correct me if I'm wrong.

HTH,


cnb
Honored Contributor

Re: Remote Console Poblem

Hi Vick,

Did you get it working?
Vick10
Advisor

Re: Remote Console Poblem

NO, It's even worse now, I am not even getting the login prompt in console, neither Ctrl B is giving the Menu.