HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Remote console disconnects when dialing in.

 
Kurt Hockenbury
Occasional Visitor

Remote console disconnects when dialing in.

I am attempting to configure remote console for dial-in before an OS upgrade. Modem is hooked up, and I went through the GSP configuration for remote console.

Right now when I dial in, I connect, and get the GSP login prompt. I can hit enter quickly (no password set up yet) and even to the GSP prompt, but whether or not I log in, I get disconnected almost immediately. I haven't timed it, but I'd say about 5 seconds is about as long as it stays connected.

Help? I'm not sure what else to try, I've looked through the GSP options, and things look ok there as best I can tell.
1 REPLY 1
Kurt Hockenbury
Occasional Visitor

Re: Remote console disconnects when dialing in.

Got it. Had to change the signalling from CCITT to Bell.