HPE Community
HPE 9000 and HPE e3000 Servers
1752772 Members
4647 Online
108789 Solutions
New Discussion юеВ

Re: Removing POINTOPOINT setting on NIC

 
Neil Armstrong
Occasional Advisor

тАО10-20-2004 04:59 PM

тАО10-20-2004 04:59 PM

Removing POINTOPOINT setting on NIC

Due to butterfingers I managed to mis-type an ifconfig command and have configured my lan1 as a PPP interface.

Aside from a reboot, is there any way to undo this? No ifconfig combination i've tried will remove the PPP designation.

cheers,
neil.
Those that rely on technology are as lost as those who create it.
0 Kudos
3 REPLIES 3
malvin drakley
Esteemed Contributor

тАО10-21-2004 04:20 AM

тАО10-21-2004 04:20 AM

Re: Removing POINTOPOINT setting on NIC

Hi Neil, have you tried typing your command with "down" at the end of the line instead of "up" and then re-typing with your correct lan address
malvin
Not me Chief, I'm Radar
0 Kudos
Neil Armstrong
Occasional Advisor

тАО10-21-2004 10:06 AM

тАО10-21-2004 10:06 AM

Re: Removing POINTOPOINT setting on NIC

Yep, tried all combinations. Just doesn't seem to be a "re-initialise" option. I even tried resetting and self-testing the card via lanadmin but that didn't help either.

Haven't found any other info around this online...maybe it's an inherent bug in HP-UX networking?

cheers,
neil.
Those that rely on technology are as lost as those who create it.
0 Kudos
Tony Constantine
Frequent Advisor

тАО09-19-2005 07:33 PM

тАО09-19-2005 07:33 PM

Re: Removing POINTOPOINT setting on NIC

Does anyone know of a workaround for this?
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.