HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Replacing the GSP

 

Replacing the GSP

Regards every body.
I´m gonna replce the GSP card from a rp 2405, i want to know if there is some special configuration after the replacement of the GSP card or if a have to update the firmware os something like that?

I need to much, thanks every body.


2 REPLIES 2
Steven E. Protter
Exalted Contributor

Re: Replacing the GSP

Shalom,

After replacement you'll want to connect to it with a serial console, ctrl-b and follow the menus for a normal configuration. The IP address is what you need to set.

Its pretty easy.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
IT_2007
Honored Contributor

Re: Replacing the GSP

you need to have IP address, GSP host name, Gateway and subnet mask. Once you replace card, configure it with above information.