HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Resetting GSP

 
M. Hersant
Occasional Contributor

Resetting GSP

I'm dealing with multiple HP 9000 servers. Occasionally, we are unable to get console access via hyperterminal (or any terminal program). The problem is only with console access (we're always able to get in vie the network). All terminal settings have been checked. A reboot doesn't help. It looks like the problem is with the GSP. It believe the GSP unit controls terminal access. Since the GSP has it's own power supply, I don't know of an easy way to reset it. Is there an easy way to reset the GSP? Remember, when this problem occurs, console access is unavailable. Thanks.
3 REPLIES 3
Saurav_1
Valued Contributor

Re: Resetting GSP

Hi,

# stty +resetGSP < /dev/GSPdiag1

This command will help.

Saurav
Tobias Hartlieb
Trusted Contributor

Re: Resetting GSP

N.B.

sometimes, you have to use
# stty +resetGSP < /dev/GSPdiag2
to get it work...

Alexander M. Ermes
Honored Contributor

Re: Resetting GSP

Hi there.
I know, taht for sample on N-class servers there is a reset switch at the backside of the box. Tried this one ? We used it for some occasions without any problems.
Rgds
Alexander M. Ermes
.. and all these memories are going to vanish like tears in the rain! final words from Rutger Hauer in "Blade Runner"