Rp8400 chassis logs

[Torsten.]

You have a problem with cell1 and the cell is currently faulty and off.

Consider to pull the cell and try, if the system works with cell0 only. This may confirm the problem is on cell1 only.

[higo]

Hi,

The cell1 is empty no cpu, RAM or other devices, i pull it as Torsten said but nothing happens the system still on this state stand by

PARTITION STATUS: E indicates error since last boot
Partition 0 state Activity
------------------ --------


# Cell state Activity
- ---------- --------
0 Power ON


It was working before with the emty cell1 (we got with this configuration)

Many thanks

[Torsten.]

>> Boot is blocked

maybe because of different firmware.
Consider to power cycle (pull plugs) and get the information from MP again, while cell1 is removed.

[higo]

Hi,




MP MAIN MENU:

VFP: Virtual Front Panel (partition status)
CM: Command Menu
CL: Console Logs
SL: Show chassis Logs
HE: Help
X: Exit Connection

the power cycle is done now no output with vfp cmd and no co cmd, do i use cc to initiate a complex.

Thanks for reply.

[Torsten.]

Please do the commands again posted by Prashanth.D.S above.

[higo]

Hi,

Please find the attached file of PS output cmd as Prashanth.D.S ask.

Not that vfp does not works and the Complex model string:UNKNOWN.

Thanks

[higo]

Hi,

Please find the attached file of PS output cmd as Prashanth.D.S ask.

Not that vfp does not works and the Complex model string:UNKNOWN.

Thanks