HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP Card manual

 
Peter Printz
Occasional Advisor

SNMP Card manual

Hi,

I've got an PowerTrust II LR, I like to install an SNMP card for that.I'm not sure in one thing.May I put the card in to the UPS online or need I shutdown the server, and ups?
I searched the web, (a lot of HP sites) and here the forums, but I can't find any manual for this card.
Please help me to solve this question.

Thanx:Peter
4 REPLIES 4
Robert-Jan Goossens
Honored Contributor

Re: SNMP Card manual

Hi Peter,

Configuring a HP PowerTrust II UPS with an SNMP interface card
DocId: KBRC00015365

http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000075211562

Hope this helps,
Robert-Jan
Peter Printz
Occasional Advisor

Re: SNMP Card manual

Robert-Jan,

Thanks for your help, I read the detailed informations, but one thing is not clear for me.
Can I do the SNMP card install online (while the server is up and run) or I need to switch off it?
The server is an HP9000, working on the production line, so when I make some modification on that, I have to wait for shutdowntime.(it's mostly in the mornings
3-4am.)
So shutdown the server for this card install or not?
(to be, or not be....?)

Peter
Zygmunt Krawczyk
Honored Contributor

Re: SNMP Card manual

Hi Peter,
you must shutdown the UPS to install SNMP card. Read the doc:
"Hewlett-Packard PowerTrust II-LR
Uninterruptible Power Supplies
SNMP/WEB Card User Guide"
http://h30140.www3.hp.com/object/IO_4379.html

Remember, that after SNMP card installation, the UPS's serial interface will work only for configuration of SNMP card, and will not work for UPS signalling.

Regards,
Zygmunt
Peter Printz
Occasional Advisor

Re: SNMP Card manual

Zygmunt,

Thanx a lot, that was the correct aswer for me.
Good work.