HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Security of remote access in K class

 
Frank_36
Occasional Advisor

Security of remote access in K class

I'll set security of remote access in K class,
^B to CM>, then execute "SO", prompt "old password", how to get the default password?
thanks
Frank
6 REPLIES 6
Mister_Z
Frequent Advisor

Re: Security of remote access in K class

Hi,

have a look to this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=123520

Hope this helps,
I work for HP
Darren Prior
Honored Contributor

Re: Security of remote access in K class

Hi Frank,

The K class doesn't have a GSP, so I don't believe the link above is relevant. As far as I'm aware the old password value is hardcoded - I'd suggest you log a call with your local HP response centre and they should be able to help you.

regards,

Darren.
Calm down. It's only ones and zeros...
Tobias Hartlieb
Trusted Contributor

Re: Security of remote access in K class

Hi Frank,

I don't know how to reset, but I know two typical settings: hprce and GRENOBLE

..give it a try!

Tobias
Frank_36
Occasional Advisor

Re: Security of remote access in K class

Thanks for all of you, I'll try and reply if succeed!
Frank
Frank_36
Occasional Advisor

Re: Security of remote access in K class

Strings "GRENOBLE" is OK, thanks for all of you!
Frank
Tobias Hartlieb
Trusted Contributor

Re: Security of remote access in K class

P.S.: Don't forget to assign points ...it might help for your next question ;-)