HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Serial cable(RS-232)configuration required for RX4640

 
Fenny_1
Super Advisor

Serial cable(RS-232)configuration required for RX4640

Hi All,
I want to access the MP of RX4640 machine with a help of a serial cable(RS-232). Could anyone please help me from where i get the exact pin congiuration for this cable.

Thanx in advance and any help in this regard is highly appreciated.
5 REPLIES 5
Luk Vandenbussche
Honored Contributor

Re: Serial cable(RS-232)configuration required for RX4640

Hi,

Why don't you do it through the lan

The MAC adress in an label on the server

arp -s IP MAC temp
telnet IP
Login : Admin/Admin
choose MA
choose LC (to configure LAN)

It is the easiest way to configure it
Fenny_1
Super Advisor

Re: Serial cable(RS-232)configuration required for RX4640

Hi,
I have configured it through LAN with the same proceure you have mentioned and it is workin prefectly.
But i dunno wat happened today when i tried to configure it through LAN again it is not wotking.
That's y i need the Pin configuartion for Serail cable.
Shameer.V.A
Respected Contributor

Re: Serial cable(RS-232)configuration required for RX4640

Hi Fayyaz,
Please find the attached guide, which is having the Pin diagram of serial cable..

shameer
.... See invisible, feel intangible and achieve impossible as everything is possible ....
Thomas J. Harrold
Trusted Contributor

Re: Serial cable(RS-232)configuration required for RX4640

Maybe I'm not understanding correctly, but you only need to configure the iLO port once, and access it via telnet (or ssh) after that.

-tjh
I learn something new everyday. (usually because I break something new everyday)
DCE
Honored Contributor

Re: Serial cable(RS-232)configuration required for RX4640

Hello,

The cable is a standard null modem cable. If you have one on hand, you do not need to make up a special cable