HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Service Processor

 
SOLVED
Go to solution
G. Knight
Occasional Contributor

Service Processor

I have an HP rp5470 with HP-UX 11.1. Can I access the service processor to read errors while the system is running and users are logged on?

Thanks
4 REPLIES 4
Luk Vandenbussche
Honored Contributor

Re: Service Processor

Hi George,

There is no problem to do this while users are connected.
Steven E. Protter
Exalted Contributor
Solution

Re: Service Processor

Shalom George,

You need to connect to the system.

If you are on console you type ctrl-b and you get the SP prompt.

If it has a network address of its own you telnet or ssh in and follow the prompt to clean out any old essions left over.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
G. Knight
Occasional Contributor

Re: Service Processor

Your answers have been very helpfull. Thank you very much
G. Knight
Occasional Contributor

Re: Service Processor

I have been provided the answer I needed. Thank you.