Service processor related error message

[Madhu_17]

Hello,

I have observed service processor related error message once in my syslog file

We have HP 9000/800 L2000 server with HP-UX 11

Any suggestions to go ahead? What is GSP and how to use these commands. Pls note that I am working remotely to this server and i do not have console access.


Thanks

[Luk Vandenbussche]

Madhu,

GSP : Guardian Service Processor
If you connect a network cable and give it an IP adres you can remotly take over your console.
Some errors about the gsp appear in the syslog

For more info on the GSP see

http://docs.hp.com/en/A5191-96022/ch03s02.html

[Tobias Hartlieb]

Hello,

I guess you saw an Event from EMS in syslog.log !?
First of all, don't worry too much about it: it is quite commone and in most instances not really of concern.
Second, if you look for the details of this Event (either by executing the command quted in the syslog.log event or by checking /var/opt/resmon/log/event.log) you will find probably some hints about "restting " the GSP !? Try them!

To access GSP from OS, you may also try some backdoor described in the following docs:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=93741
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=14974

It should be noted, that this backdoor is only available in certain types of GSP of A-, L-, N-class Servers.

Regards.

Tobias

[Madhu_17]

All,

Thanks for all your inputs. I will try all these options and let you know if i need any help.