HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Superdome GSP

 
TYP3R
Frequent Advisor

Superdome GSP

Hi Guys

I'm having trouble with some GSP for the Superdome, I'm testing a few of them but not one of them have detected my partition, I assume that the configuration for the partition is stored on the flash disc thats on the GSP but i could be worng, If i'm right how do i configure the flash disc to see my partition so i can boot up from it ? ALso i dont want to use the orginal flash disc on these new GSP, How this does make sense to you guys

Will
9 REPLIES 9
Torsten.
Acclaimed Contributor

Re: Superdome GSP

Hi,

this is a task to be performed by authorized service personnel.

The partition information is stored on the GSP and every cell, so normally the new GSP will get this information from the cells.

I would recommend to call HP service.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
TYP3R
Frequent Advisor

Re: Superdome GSP

I've put the flash card onto the new GSP and it have seem the partition and i've been able to boot it up, But i dont need an authorized service personnel to get it done, There should a way of getting this information to the flash card from the server itself
Torsten.
Acclaimed Contributor

Re: Superdome GSP

It is important to follow the procedure and do the correct steps - trained people know the steps.
There is no service guide on docs.hp.com - there must be a reason for this.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Phil uk
Honored Contributor

Re: Superdome GSP

Hi,
What is it that you are exactly trying to achieve?
Normally you wouldn't move GSP/MP's between SuperDomes.
What model of SuperDome(s) do you have and what are the versions of firmware on your SuperDomes and GSP/MP's?
Are you using MP firmware instead of GSP firmware or vice versa?
Also, have you checked the battery save switch?
TYP3R
Frequent Advisor

Re: Superdome GSP

You can ignore my last mail, Apparently one of the engineering placed the orginal GSP into the Superdome and not the one that needs to be tested,
What i'm trying to achieve Phill is to test some GSP for the superdome but these GSP doesnt detect the partition that already have created.

FW GSP = rev 7.30
FW PM = 7.16

MP firmware instead of GSP firmware or vice versa - Dont know
And i haev checked the battery save switch