Superdome I/O Chassis Question

[Tim Hempstead]

We're looking at splitting one of the NPars on our Superdome (an SD32?) into two VPars. In order to do this we need to add some i/o cards to the system, specifically two fibre-channel controllers, (probably two HP Tachyon XL2 Fibre Channel Mass Storage Adapters) and Scsi controllers for the system disks. The NPar to be used is made up of one cell with one i/o chassis.

My question is is there limitations on which slots in the i/o chassis the cards can be installed into, (i.e. are some slots 32bit/33 instead of 64bit/66) ? Also where on the HP site can i find this sort of technical information?

Thanks

Tim

[Shaikh Imran · Accepted solution]

Hi,
Please see if this helps you :
http://docs.hp.com/hpux/onlinedocs/5990-7226A/5990-7226A.html

And try this also:
http://docs.hp.com/hpux/onlinedocs/A5201-10028/A5201-10028.html

Regards,

[Tim Hempstead]

Great, that had the info I needed.

Thanks