HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Superdome I/O Chassis Question

 
SOLVED
Go to solution
Tim Hempstead
Frequent Advisor

Superdome I/O Chassis Question

We're looking at splitting one of the NPars on our Superdome (an SD32?) into two VPars. In order to do this we need to add some i/o cards to the system, specifically two fibre-channel controllers, (probably two HP Tachyon XL2 Fibre Channel Mass Storage Adapters) and Scsi controllers for the system disks. The NPar to be used is made up of one cell with one i/o chassis.

My question is is there limitations on which slots in the i/o chassis the cards can be installed into, (i.e. are some slots 32bit/33 instead of 64bit/66) ? Also where on the HP site can i find this sort of technical information?

Thanks

Tim

2 REPLIES 2
Highlighted
Shaikh Imran
Honored Contributor
Solution

Re: Superdome I/O Chassis Question

Hi,
Please see if this helps you :
http://docs.hp.com/hpux/onlinedocs/5990-7226A/5990-7226A.html

And try this also:
http://docs.hp.com/hpux/onlinedocs/A5201-10028/A5201-10028.html

Regards,

I'll sleep when i am dead.
Tim Hempstead
Frequent Advisor

Re: Superdome I/O Chassis Question

Great, that had the info I needed.

Thanks