HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Superdome - flashing Attention light on cabinet 0.

 

Superdome - flashing Attention light on cabinet 0.

My HEWLET-P-PRC-A5200A (SUPERDOME)see message below:

flashing Attention light on cabinet 0.

made sure system is in Maint. mode and connected to the server.
checked the latest error logs and observed the following:
-- # Location Alert Keyword Timestamp
-- 2510 PDC 0,0,0 *2 0x200002268200355c 0x0000000000020000 IODISC_SBA_FLUSH_CACHE_ERR
-- 2510 PDC 0,0,0 *2 0x58000a0000003550 0x0000690213020e31 03/19/2005 02:14:49

Also checked the power and hardware configuration status:
-- HW status for SD64000 compute cabinet #0: NO FAILURE DETECTED
-- Power switch: on; Power: enabled, good; Door: closed
-- Fan speed: normal; Temperature state: normal
-- Redundancy state: fans and blowers redundant, BPSs redundant (please see attachment for entire output)
Thx
3 REPLIES 3
Mic V.
Esteemed Contributor

Re: Superdome - flashing Attention light on cabinet 0.

Hi, Robert,

No attachment, sorry. :(

Lucky guy to have a superdome. Being that it's the weekend, you might want to give HP a yell.

Check out this link, though; it might be a firmware/PDC update:

http://archives.neohapsis.com/archives/hp/2003-q2/0076.html

HTH,
Mic
What kind of a name is 'Wolverine'?
Tony Scully_2
Valued Contributor

Re: Superdome - flashing Attention light on cabinet 0.




Robert,

I assume the system is up and running OK?

You can set the log output to text (using t) which sometimes gives a bit more usable info.

What logs are available?

T













You CAN do that on HP
melvyn burnard
Honored Contributor

Re: Superdome - flashing Attention light on cabinet 0.

You have a hardware error, I suggest you log a call with your local HP Response Centre
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!