HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

System Firmware A500

 
Raul Andrade_1
Frequent Advisor

System Firmware A500

Hi, I have a server Hp9000 A500
this one present a error when boot.
the error is the next
SL


Select Chassis Code Buffer to be displayed:
Incoming, Activity, Error, Current boot or Last boot? (I/A/E/C/L) e
e


Set up filter options on this buffer? (Y/[N])


The first entry is the most recent Chassis Code
Type + CR and CR to go up (back in time),
Type - CR and CR to go down (forward in time),
Type Q/q CR to quit.


Log Entry # 0 :
SYSTEM NAME: uninitialized

DATE: 08/23/2005 TIME: 02:11:22

ALERT LEVEL: 2 = Non-Urgent operator attention required


SOURCE: 0 = unknown, no source stated

SOURCE DETAIL: 0 = unknown, no source stated SOURCE ID: FF

PROBLEM DETAIL: 0 = no problem detail
F

CALLER ACTIVITY: 6 = machine check STATUS: 2

CALLER SUBACTIVITY: 40 = implementation dependent

REPORTING ENTITY TYPE: 0 = system firmware REPORTING ENTITY ID: 00


0x0000002000FF6402 00000000 00000000 type 0 = Data Field Unused

0x5800082000FF6402 00006907 17020B16 type 11 = Timestamp 08/23/2005 02:11:22

Type CR for next entry, Q CR to quit.



Log Entry # 1 :
SYSTEM NAME: uninitialized

DATE: 08/23/2005 TIME: 02:11:22

ALERT LEVEL: 2 = Non-Urgent operator attention required


SOURCE: 0 = unknown, no source stated

SOURCE DETAIL: 0 = unknown, no source stated SOURCE ID: FF

PROBLEM DETAIL: 0 = no problem detail


CALLER ACTIVITY: 6 = machine check STATUS: 2

CALLER SUBACTIVITY: 41 = implementation dependent

REPORTING ENTITY TYPE: 0 = system firmware REPORTING ENTITY ID: 00


0x0000002000FF6412 00000000 00000000 type 0 = Data Field Unused

0x5800082000FF6412 00006907 17020B16 type 11 = Timestamp 08/23/2005 02:11:22

Type CR for next entry, - CR for previous entry, Q CR to quit.



Log Entry # 2 :
SYSTEM NAME: uninitialized

DATE: 08/23/2005 TIME: 02:11:22

ALERT LEVEL: 2 = Non-Urgent operator attention required
1 REPLY 1
Adisuria Wangsadinata_1
Honored Contributor

Re: System Firmware A500

Hi Raul,

From the system logs, looks the logs has been generated by the machine check. The alert level is ALERT LEVEL 2.

If the system cannot boot-up, you need to check whether the system can boot-up or not until BCH mode. If the system can boot up until BCH mode, you can get the PIM information.

But if the system up & running, you can ignore the messages. Or try to upgrade the firmware, below is the url for the latest firmware for A500 :

http://www1.itrc.hp.com/service/patch/patchDetail.do?BC=patch.breadcrumb.main|patch.breadcrumb.search|&patchid=PF_CHAW4350&context=firmware:cpu

Hope this information can help.

Cheers,
AW

now working, next not working ... that's unix