HPE 9000 and HPE e3000 Servers
1748119 Members
3450 Online
108758 Solutions
New Discussion юеВ

Re: System Red led "canot boot the system" console hang up

 
MahdiRa
Frequent Advisor

System Red led "canot boot the system" console hang up

Dear all
i have HP 9000/RP3410 server, it was working ok until i rebooted the system, i get to "MP MAIN menu" i wrote CO command and the system hangs on
" Prior Console Output"
"Live Console"
when i stoped the system for 3 hours or 5 hours i booted the system ok
after that i shutdown start again i get the same problem so every time i shutdown the system i have to wait 3-5 hours to boot ok
thx in advanced
Mahdi
2 REPLIES 2
Adisuria Wangsadinata_1
Honored Contributor

Re: System Red led "canot boot the system" console hang up

Hi Mahdi,

You need to check the system log & power supply status from MP prompt :

SL > E > T
CM > PS

From OS, check the syslog.log & event.log :

/var/adm/syslog/syslog.log
/var/opt/resmon/log/event.log

Check also the firmware on your system (from MP prompt) by typing HE (help) & see the firmware information :

HE

Do you still got the RED LED on your system until now ? If still have, better you call HP and send the information above to them to analyze.

Hope this can help you.

Cheers,
AW
now working, next not working ... that's unix
KVK
Valued Contributor

Re: System Red led "canot boot the system" console hang up

What is the System front panel LED status ?
Are you hearing any beeps if you press buzzer button in front panel ?
Can you post the logs which it's requested by Mr.adisuria ?

Better to contact HP for H/W problem