1748105 Members
4922 Online
108758 Solutions
New Discussion юеВ

Re: T600

 
SOLVED
Go to solution
Jon Steele
Valued Contributor

T600

I need to upgrade my firmware for SP card to SP 2.03 or 2.10 and the PDC.Could someone please point me in the correct direction to get this firmware and how I should do it.

Thank you in advance.

Jon
4 REPLIES 4
Torsten.
Acclaimed Contributor
Solution

Re: T600

Hi Jon,

here is the how-to:

http://docs.hp.com/en/1016/A1820-90003.pdf

Ask HP for the bits!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jon Steele
Valued Contributor

Re: T600

Thanks I printed that out on how to do it.Does anyone know where I get the new firmware from.Once again thanks for the help

Jon
Torsten.
Acclaimed Contributor

Re: T600

You won't find the firmware on the net, I'm pretty sure.

Give HP a call!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jon Steele
Valued Contributor

Re: T600

Thank you for your help.

Jon