HPE 9000 and HPE e3000 Servers
Showing results for 
Search instead for 
Did you mean: 

Temperature thresholds

Diego A. Sánchez
Occasional Contributor

Temperature thresholds

I need to monitor the temprarture of our two a-class, what command do that.
And I'd like to know if there is a way to change the temperarture threshold

Thanks in advance.
Joshua Scott
Honored Contributor

Re: Temperature thresholds

I don't beleive that you can monitor the temperature without an external thermometer (but I will be corrected if I am wrong.)

There is no way to change the temperature threshold, as that would cause damage to the server, should the temperature get too high.

What are the chances...
Honored Contributor

Re: Temperature thresholds

V class servers had temprature sensor in it.

Whay HP did not provide with other servers?
You can not change the threshold.
There is no substitute to HARDWORK
Jeroen Peereboom
Honored Contributor

Re: Temperature thresholds

Some disk cabinets have sensors too.
Maybe your server is connected to such diskcabinet and you may receive messages from EMS.

James A. Donovan
Honored Contributor

Re: Temperature thresholds

Take a look at the manpage for the envd daemon: "man envd".

It will give you some good info.

You can find the relevant temperature ranges listed on page 53 here:

Remember, wherever you go, there you are...