HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Updating the GSP firmware

 
SOLVED
Go to solution
Greg Smith_11
Occasional Contributor

Updating the GSP firmware

Hello.
We have an N4000 server that we need to upgrade the GSP firmware on but I can't find any documentation on how to do it. I found the patch name and where to download it but we've never done this before so I'd like to read some instructions.

Could you point me to any info?
Thanks,
Greg
3 REPLIES 3
Thayanidhi
Honored Contributor
Solution

Re: Updating the GSP firmware

Hi,
Along with GSP firmware download there would be PDF which will give full instructions!

Basically you need to set the IP for GSP (MP) interface using lc command. Then connect a ethernet and keep your firmware files in FTP server. (It could be same server also). Then follow the instructions.

This is sensitive process, read all instructions before start.

Verify the cksum values.

If you are keeping firmware files in a PC you need FTP server installed. (Bison FTP server).

Regds
TT

Attitude (not aptitude) determines altitude.
mits
Respected Contributor

Re: Updating the GSP firmware

You should be able to find a full description once you access the patch file.

www.hp.com
-> search PF_CCANGSPB0220

You should be able to get the link below.
http://www1.itrc.hp.com/service/patch/patchDetail.do?admit=-682735245+1118884989899+28353475&patchid=PF_CCANGSPB0220

-> installation instructions

If your GSP is A-version, use PF_CPREGSPA0112.

Note: Please read through the instruction carefully.
Stf
Esteemed Contributor

Re: Updating the GSP firmware

look at the attached file, I hope this couled help...

Stf ;-)