HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

V-Class Teststation Help

 
SOLVED
Go to solution
Emil Henry
Regular Advisor

V-Class Teststation Help

Hello!

I have completed the setup of a V2600 (donated) and it works fine with a 712 Teststation (that was connected to our V2200). I am not able to connect it to the B180L which has the teststation software. I am not sure whether it has all the required hardware (if any). I am not able to get the AUI to be listed in a ioscan or sam, but see 100BT card fine. Any advice?

Thanks in advance.

Regards,

Emil
2 REPLIES 2
Stefan Stechemesser
Honored Contributor
Solution

Re: V-Class Teststation Help

Hi Emil,

on the back of the B180 you have two lan ports (RJ45 and AUI) you can only use one of them at a time
=> you need an additional network card in a PCI slot for the production lan (to your intranet). The V-Class diagnostic lan have to be connected to the AUI and the RJ45 on the Core I/O has to be unused.

best regards

Stefan
Emil Henry
Regular Advisor

Re: V-Class Teststation Help

Hi Stefan!

Thanks for confirming my thoughts. Yes, I did connect the transceiver to the AUI port. For whatever reason I don't see the AUI on ioscan or sam. I am not planning to connect the teststation to the production network.

Regards,

Emil