HPE Community
HPE 9000 and HPE e3000 Servers
1753448 Members
4958 Online
108794 Solutions
New Discussion юеВ

Re: V class server

 
Rui Medeiros_1
Contributor

тАО10-06-2003 03:48 AM

тАО10-06-2003 03:48 AM

V class server

excessive errors from the I/0 subsystem.
LPMC type: I-Cache Parity Error
0 Kudos
3 REPLIES 3
Jeff Schussele
Honored Contributor

тАО10-06-2003 05:19 AM

тАО10-06-2003 05:19 AM

Re: V class server

Hi Rui,

*Usually* this indicates that you have a CPU that is starting to fail.
I'd call this in to HP support as a HW call.
You don't want to wait until it fails completely & panics the system.

Rgds,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
0 Kudos
Alexander M. Ermes
Honored Contributor

тАО10-08-2003 12:50 AM

тАО10-08-2003 12:50 AM

Re: V class server

Hi there.
Check your system with one of the stm tools
( cstm / mstm /xstm ).
Looks like one of your CPU's is going down.
We have had the same error a few days ago.
If you open a hardware call, tell them to check the backplane and the carrier board as well. We had three outages, because finally they had to change the backplane on our V2500.
Rgds
Alexander M. Ermes
.. and all these memories are going to vanish like tears in the rain! final words from Rutger Hauer in "Blade Runner"
0 Kudos
Sanjay_6
Honored Contributor

тАО10-09-2003 03:02 AM

тАО10-09-2003 03:02 AM

Re: V class server

Hi,

Try these links for more info on the error.

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000062687453

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000063211994

Hope this helps.

Regds
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.