HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

V2500 DIAG VESRION ON TEST STATION

 
SOLVED
Go to solution
pj_11
Super Advisor

V2500 DIAG VESRION ON TEST STATION

Hello,

Can anyone help i need to find out the diag version on the test station 712/60.Do you have
a command i can input at the tsetstation to found this out

PJ
3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: V2500 DIAG VESRION ON TEST STATION

Hi,

do a "swlist" and look for "B7148AA,r=3.2", this is the test station software release 3.2.

You also may do a

# diag_version

as sppuser.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Robert-Jan Goossens_1
Honored Contributor

Re: V2500 DIAG VESRION ON TEST STATION

PJ,

http://docs.hp.com/en/A5075-90006/A5075-90006.pdf

diag_version
The diag_version utility displays the product name and the version of
the current teststation software. For example:
$ diag_version
HP9000/V2500 Diagnostics, Version 1.0.0.0

Best regards,
Robert-Jan
pj_11
Super Advisor

Re: V2500 DIAG VESRION ON TEST STATION

Hello,

Thank you very much spot on.I need to update
the firmware so HP needed the Diag version. Thanks again.

PJ