HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

WARN 7702 at boot

 
SOLVED
Go to solution
Giorgio Battista
Occasional Contributor

WARN 7702 at boot

Hello,

I have a problem with a K570 server.
While the server is booting, during HW tests, on the console I can see the message: WARN 7702.
THen the server goes up, but no service is function (no ping, no telnet etc.).

Do you know where is problem?

Thanks.
2 REPLIES 2
Thayanidhi
Honored Contributor
Solution

Re: WARN 7702 at boot

This is warning is normal if you enabled the fast boot. (memory not tested fully)!

There is some other some where.

Login using the console and find out problem.
As you mention no ping or telnet, I feel some network related issue.

Check the cable, link status.

run lanscan,lanadmin, ifconfig to find out current status. check /var/adm/syslog/syslog.log and /etc/rc.log

Revert
Regds
TT
Attitude (not aptitude) determines altitude.
mits
Respected Contributor

Re: WARN 7702 at boot

Customer viewable documents are available on the knowledge database for ITRC users. ( you need to have a support contract, though...)

HKCLAKBCA00001216
WARN 7702 on LCD display

KCKBCA200108311
HP 9000 K-Class Servers: Troubleshooting System Hardware Faults