Web Console stopped working...

[Jeddel Yeras]

I recently had to shutdown my system due to a scheduled power-outage. When I brought the system back up, I noticed that the following service failed:

Configuring LAN Services...

Subsequently, I can no longer get to my system via the LAN console. I checked the settings in GSP and they are correct, but I didn't find an entry for the NIC in SAM... Could this be a hardware failure, or am I missing something in the configuration? I'm perplexed because all was well until the shutdown...

Any suggestions would be greatly appreciated!

Thanks!

Jeddel

[Steven E. Protter · Accepted solution]

You had some patches scheduled to configure after boot that didn't configure properly.

swverify \*

You may need to swremove the patches.

You may be able to:

swconfigure \*

A boot may be required.

SEP

[Jeddel Yeras]

Thanks!

I did find some issues... So I take it from your response that the error at startup and the LAN Console not working are separate issues.

So my questions are:

1) Should the LAN Console show up in SAM? All other NIC's appear there, except this one.

2) I verified configuration on GSP, but I do not have an "SO" menu option... what does that mean?

3) Would re-configuring the LAN Console resolve the issue? If so, how do I go about doing that?

Thanks!