cancel
Showing results for 
Search instead for 
Did you mean: 

Web Console

 
Dan Maul
Trusted Contributor

Web Console

Was wondering if any one had some ideas why I can not connect to one of our boxes using the web interface. The box is a L3000/RP5470 with HP-UX 11.i and when I attempt to connect it nevers propmts me for a user name and password. Just a blank screen with a blinking cursor, and will not allow any key board commands.

Thanks for your thoughts!
I always keep a supply of stimulant handy in case I see a snake--which I also keep handy.
10 REPLIES 10
KapilRaj
Honored Contributor

Re: Web Console

Is getty running on /dev/console ?.

Regds,

Kaps
Nothing is impossible
Bernhard Mueller
Honored Contributor

Re: Web Console

Try resetting the GSP:

# stty +resetGSP
Regards,
Bernhard
Naveej.K.A
Honored Contributor

Re: Web Console

serial console or web console?????

a dead or a zombie process for your /dev/console

do a fuser -ku /dev/console and try whether you get a login screen..

If you are using a web interface, you get to connect to IP address of the GSP interface, a lan cable has to be plugged into the RJ45 connector on the GSP card.

regds
Naveej
practice makes a man perfect!!!
Joshua Scott
Honored Contributor

Re: Web Console

What exact steps are you using to connect?

Josh
What are the chances...
Dan Maul
Trusted Contributor

Re: Web Console

I connect using a web interface by typing in the ip address of the web console. It brings up the console but does not do anything else, ie asks for a user name and password nor does it allow me to type any commands. Have tried control B & ^Ecf. No luck.
I always keep a supply of stimulant handy in case I see a snake--which I also keep handy.
Joshua Scott
Honored Contributor

Re: Web Console

I may be wrong, but I think that you have to specify the port number (8080 by default, i think) in order to connect.

Josh
What are the chances...
Sanjay_6
Honored Contributor

Re: Web Console

Do you have java enabled on the browser ?

Hope this helps.

Regds
Dan Maul
Trusted Contributor

Re: Web Console

Sanjay, Yes I do have java enabled. As a matter of fact I updated to version 1.4.2_04 build b05
I always keep a supply of stimulant handy in case I see a snake--which I also keep handy.
Robert True
Frequent Advisor

Re: Web Console

My web consoles stopped working also. Contacted CSS but no help, although they did suggest changing the java scripting settings in the browser as mentioned above. Finially discovered a really old version of netscape (4.75 i think) will still work. Like you too, I had upgraded to a newer version of java.

The machine with the netscape 4.75 is running an older version of java, but I can't give you the rte version at the present time.

Rt.
Bill Thorsteinson
Honored Contributor

Re: Web Console

Use netscape 4.7. It uses Java 1.1.

I have had some success with the java plugin using Java 1.2.2.

If you upgrade to the latest version of the software it will sometimes start with a newer version of java. Check that the java console is
using the default version of java.

HP really need to provide updated software that
works with Java 1.4.