a host: machine rp5430,and it's alarm lamp is on,how can i resolv it

[常有慈悲心]

how can i read it's alarm log?

[Ravi_8 · Accepted solution]

Hi

press ctrl+b
login:
passwd:

press enter at login and passwd prompt
gsp>sl

now press e for error, which display the error in hexadecimal format (which only HP support people can read)

[Slawomir Gora]

Hi,

log to GSP - CTRL-B from console
Read logs - sl (search log)
Return to console - co

[Peter Godron]

Hi,
The alarm light is set by the Service Processor, accessed via control b
Normally no username or password is required.
From there on the menues are quite self-explanatory.
co returns you to the console.
Remember a warning light is not ALWAYS a notice of total failure!
Regards

[Dan Bolton]

Hi,

Just to clarify... the lamp will light at the occurrence of an "event", and will remain lit even after the event is passed or cleared.
Following the above instructions to use the Service Processor to view the log will not only tell you what (and when) the "event" was, but the very act of viewing the logs will extinguish the lamp (provided the problem no longer exists).

D

[Dan Bolton]

DISCLAIMER:

I know the above to be true on RP74XX servers, I beleive it is correct on the RP54XX series as well.

Anyone - please correct me if that is not so!

D