boot from raid controller

[Wally S]

I searched but no definitive answers found to the following question.

Does anyone know if the A7143A RAID controller has boot support in an rp7420?

Tried this site but nothing definitive:
http://www.hp.com/products1/serverconnectivity/support_matrices.html

Thanks

[Leif Halvarsson_2]

Hi,

Yes, it is supported. Check this document:
http://docs.hp.com/hpux/pdf/J6369-90001.pdf

[Wally S]

Great document thanks, I see that the rp7420 is not mentioned in this doc, assumption being that since the rp7410 is supported the rp7420 will follow.

Unfortunately we have a paranoid situation where seeing it in writing would alleviate the fear.

[Zygmunt Krawczyk · Accepted solution]

Hi,

look at the links:

http://www.hp.com/products1/serverconnectivity/storagesnf2/raid160/specifications/index.html

http://www.hp.com/products1/serverconnectivity/support_matrices.html

The A7143A has boot support in rp7420.

Regards,
Zygmunt