cab1 partitions are showing warning in VFP

[Guns_1]

Hi,

we have a superdome SD64B. In that we are having five partitions. The patitions are created as below mentioned.

-------------------------------+
Cabinet | 0 | 1 |
-------------+--------+--------+
Slot |01234567|01234567|
-------------+--------+--------+
Partition 0 |XXXX...X|........|
Partition 1 |........|XXXX...X|
Partition 2 |....XXX.|........|
Partition 3 |........|....X.X.|
Partition 4 |........|.....X..|

We have powered OFF the CAB0 after shutdown the par0 and par2. After powered OFF and powered ON the CAB0. CAB1 partitions are got rebooted automatically, and its showing warning in the VFP.

Is there any problem on powering OFF the CAB0..?

Please any one help me on this.

Thanks,

-Guna

[Anshumali]

I might be wrong on this but i thought the procedure was:

OFF:Cab 1->Cab0
ON: Cab 0->Cab1

What warning you got BTW?

[Guns_1]

After power OFF and power ON the CAB0, the partitions on the CAB1 are got rebooted automatically. Also Its showing some warnings in the VFP for the partitions which all are in the CAB1.

After reboot, I'm not seeing any problem on the partitions(in os) which all are in the CAB1. But still in the VFP its showing warning state for those three partitions.

Thanks,
-Guna

[Chandrahasa s]

Hi,

If there are warning on vfp then there will be logs.

If you could able to provide eventlog from mp we can light on your problem.

chandra

[Guns_1]

Hi chandra,

The mentioned issue i have resolved by power OFF and ON the whole complex. Now there is no warnings on the VFP also. Just i need to know whether the system is having any prob or no. Also tell me what is the procedure for power off the super-dome.

I have attached the logs which you asked, Kindly check it and help me.

-Guna