HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

cansole problem

 
Kanokwan Sutthiphasuk
Occasional Visitor

cansole problem

I connect HP console to serial console port but all what I got are junk characters (letters from MAR) I cannot use Lan console because I don't know it's IP, what should I do, the server type is RP54xx
4 REPLIES 4
Vishwas Pai
Regular Advisor

Re: cansole problem


At the console (eventhough it is printing junk)
press Ctrl+B. You will get a GSP prompt.

GSP> CA

and change the

Local Console Serial Port Terminal Type:
to vt100

Now...

GSP> XD

Type `R'

After sometime

GSP> CO

press ctrl+L and see if everthing works fine.

This has worked for me sometimes.

HTH -vishwas

Victor Fridyev
Honored Contributor

Re: cansole problem

In order to reset HP console dumb terminal switch it off, press key D, switch the terminal on and wait for about 10 seconds. You have to hear a beep. Release the key. This process returns default setting for terminal.

The terminal types suitable for rp5400 are vt100 and HP.

I hope, you know how to set them.

HTH
Entities are not to be multiplied beyond necessity - RTFM
Stf
Esteemed Contributor

Re: cansole problem

To obtain your ip lan console go to the GSP and type LC and it will give you its IP address... also you can chnage it...

Stf ;-)
Kanokwan Sutthiphasuk
Occasional Visitor

Re: cansole problem

Someone change baud rate differ from 9600b/s