console commands references

[Prashant Zanwar_4]

any reference to console commands regularly used for RP Series, or old V, N -class servers.. Would appreciate the help ..
Thanks and regards
Prashant

[Sheriff Andy]

Are you talking about in the GSP?
If so you can type he at the GSP> prompt. Then you can from the help menu type li for list.

The commands will differ depending on the firmware revision of your gsp.

[Sundar_7]

V-class is an odd-ball server with OBP-kind GSP (or whatever they call it).

the newer RP series have MP and the older machines have GSP

nPar capable servers interface will be little different than the other systems that are not cell based.

Common commands from the top of my head

ls = lan console status
lc = lan console config
rs = reset status
Console log view
Chassis log view
Enable/disable web/lan console
Power status of the components

but as Sheriff has mentioned above, whether is it MP or GSP, typing HE will list you all the commands.

[Ranjith_5]

Hi Prasant,

Attached the PDF of MP-GSP User Guide.

HTH.

Regards,
Syam

[mark_643]

if you press crtl b to gsp to come up and type 'he' list commands available