core_hw Events ??

[MikeL_4]

I started receiving the following event monitor messages.. I can't find anything wrong or why they are coming out...
Can anyone assist ???

>------------ Event Monitoring Service Event Notification ------------<

Notification Time: Wed Jan 14 14:51:08 2009

osglbhp1 sent Event Monitor Restart information:

Title: ia64_corehw
Command: /usr/sbin/stm/uut/bin/tools/monitor/ia64_corehw
Vendor: Hewlett-Packard Company
Version: B.01.00
Monitor PID: 6891

Resources currently monitored:
/system/events/ia64_corehw/core_hw

>---------- End Event Monitoring Service Event Notification ----------<

[cnb]

Hi Mike,

Check /var/opt/resmon/log/event.log

There should be detailed info in there if not let me know.

HTH,

[cnb]

Also might want to check the system health using cstm and logtool.

# echo "sel dev all;info;wait;il"|/usr/sbin/cstm

#cstm
cstm> ru logtool
logtool> rs
logtool> fl

HTH,

[MikeL_4]

The event log just appears to me to be restarting the event monitor... I don't see any issues in anything....

[MikeL_4]

forgot cstm output from commands provided...

[cnb · Accepted solution]

Hmmm...

You probably already saw this: http://docs.hp.com/en/diag/ems/emd_ia64core.htm

Is there anything new in SEL that might be triggering these? The are a few fixes to this monitor for failing to log certain events, so you might want to update STM (SFM/EMS) to make sure everything is being logged properly.

Also you may want to check the other log files in /etc/opt/resmon/log/ to see if anything else indicates why the monitor is restarting.

HTH,

[MikeL_4]

Logtool Utility>rs
-- Logtool Utility INFORMATION --
A current raw log file does not exist to use as the default selected file.
You must select an existing file using either Select Raw or Select Formatted
as appropriate from the File menu.

Logtool Utility>fl
-- Logtool Utility INFORMATION --
A current raw log file does not exist to use as the default selected file.
You must select an existing file using either Select Raw or Select Formatted
as appropriate from the File menu.

[cnb]

Hmmmm...

Try these:

SR then FR

File Commands

SelectRaw (SR) - Select a raw log file(s) to view, filter or format
FormatRaw (FR) - Format the currently selected raw log file
SelectFormatted (SF) - Select a formatted log file(s) to view or filter
SwitchLog (SL) - Create a new "current" raw log file
Save (SAV) - Save Logtool's main window
Print (PRN) - Print Logtool's main window
Exit (EX) - Exit Logtool and return to the STM prompt

View Commands

RawSummary (RS) - View the summary of the currently selected raw log file(s)
RawLog (RL) - View the currently selected raw log file(s)
FormattedSummary (FS) - View the summary of the currently selected formatted log file(s)
FormattedLog (FL) - View the currently selected formatted log file(s)

[Torsten.]

Your diagnostic version (Feb 2007) is already unsupported, see

http://docs.hp.com/en/diag/stm/stm_upd.htm

Consider to update!

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

The reason is probably this:

Previously this system was not responding to the monitor's query because
of one of the following reasons :

* system's name could not be resolved to IP address
* the network was down or the network response was poor
* the Online Diagnostic software was not present or was not running on
it

[MikeL_4]

Updating EMS and OnlineDiag software seems to of resolved the issue...

Thanks