HPE 9000 and HPE e3000 Servers
1748146 Members
3690 Online
108758 Solutions
New Discussion юеВ

Re: cpuconfig rp7405

 
ibrahim_9
Advisor

cpuconfig rp7405

Dear friend:
I have rp7405 with four processor,
3 proccesor configure and one proccesor not configure , every time I try to config the proccesor (( cpuconfig 0 0 on )) system hang and error log give me :

45 PDC 0,0,0 *10 0x580008a236000010 0x000068070e0b1905 PDH_CCO_FIFO_FULL

please any one cane help me
3 REPLIES 3
Stefan Stechemesser
Honored Contributor

Re: cpuconfig rp7405

Hello,

the Chassis Code simply means that too many Chassis Codes came in at the same time or that the Cellboard has a problem communicating with other devices on the I2C management bus.

You wrote that one CPU was deconfigured. The question is: why ?

Are there any other Chassis Logs in the activity log ? Please check also in /var/tombstone or in BCH service menue if there have happened an HPMC (high priority machine check).
I think it would be a good idea to call the HP support at this time to analyze why the CPU is deconfigured and why reactivating does not work.

Best regards

Stefan
Shaikh Imran
Honored Contributor

Re: cpuconfig rp7405

hi,

I will advise you to run STM info as well as exerciser to see if you get any clues.
Or
If the Hardware-Vendor is avialable.
Ask him to open the server & try replacing the other (configured) CPU to this place & see what's the status.
Also pls ask him to check the PSM (Processor support modules) status.


Regards,





I'll sleep when i am dead.
ibrahim_9
Advisor

Re: cpuconfig rp7405

thannks for every one