dipswitch setting for 875MHz procs in an rp5470!

[daniel smith_3]

anyone have or know where I might be able to find the dipswitch setting for 875MHz processors in an rp5470(A6144B). The main board part number is A6797-60001

thanks for all of your help!

[JohnWRuffo]

Daniel:
Ensure that the following conditions are met before installing an 875 MHz CPU:
-- HP-UX 11.i IPR0206 or later is installed.
-- PDC firmware revision is 42.19 or later.
Failure to observe these precautions will result in system failure.

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/A5191-96022/A5191-96022_top.html&con=/hpux/onlinedocs/A5191-96022/00/00/5-con.html&toc=/hpux/onlinedocs/A5191-96022/00/00/5-toc.html&searchterms=rp5470&queryid=20040614-173245

[Jon Steele · Accepted solution]

Hi,

Try these switch settings.

1 2 3 4 5 6 7 8
off off on off on off on off

This is for 875 procs on a RP5470

I hope this helps

Jon

[Ted Buis]

There is a different processor support module (PSM) for the650, 750 and 875MHz chip is the A6799A. If you had an earlier, slower speed chip originally (an L3000 with 550MHz), then you need the newer PSM.