HPE Community
HPE 9000 and HPE e3000 Servers
1752794 Members
6150 Online
108789 Solutions
New Discussion юеВ

Re: enable process in rp3440

 
Torsten.
Acclaimed Contributor

тАО03-31-2011 08:55 AM

тАО03-31-2011 08:55 AM

Re: enable process in rp3440

You need the license key, run update on the system and enter that key.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Trng
Super Advisor

тАО03-31-2011 04:53 PM

тАО03-31-2011 04:53 PM

Re: enable process in rp3440

Hi Torsten,

pls tell me how to run the update ..is it from OS or from the BCH ?



rgds,trng
administrator
0 Kudos
Torsten.
Acclaimed Contributor

тАО03-31-2011 08:54 PM

тАО03-31-2011 08:54 PM

Re: enable process in rp3440

From BCH go to service menu and run upgrade, enter serial# and key#.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.