fibre card on rp5470

[antonio elder prado]

Hi, i did find some fibre cards and would like to install on rp5470 running 11.0. do you know if it is possible.
model rp5470.
os: 11.0
card: EMULEX
and all i can see on the stick on the card is:
EM212-L3TA

Appreciate any help,

thank you,
./a/.

[Grayh · Accepted solution]

Hi,

EMULEX is supported rp5470.May be for further info you can check the following Doc which lists the FC Cards that are supported on different servers:-

http://h21007.www2.hp.com/portal/site/dspp/PAGE.template/page.document?ciid=8508852bcbe02110852bcbe02110275d6e10RCRD#emulex_lp10000

[Khairy]

hi antonio,

it is possible. Check emc website.

http://www.emulex.com/support/hpux/index.jsp

Look for driver version 4.21.05 (pa-risc). There is a driver kit for hpux 11.0. Download the manual and install it.

By the way EM212-L3TA is actually LP9002L. Some time you can find its label as a small sticker on the adapter...

really appreciate if you cld assign some points. thanks!

[antonio elder prado]

thank you Khairy and DMV, downloading the drivers now.

once again, thank you for your time and response.

./a/.