HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

firmware revision

 
jamshed
Frequent Advisor

firmware revision

How can i find my firmware revision on L1000?
5 REPLIES 5
Bharat Katkar
Honored Contributor

Re: firmware revision

Go to Console:

Press B
This will take you to the GSP Prompt and also display the Firmware Revision.

Hope that helps.
Regards,
You need to know a lot to actually know how little you know
Bharat Katkar
Honored Contributor

Re: firmware revision

Hi,
After you get the GSP prompt:
GSP> HE
It is will display the firmware revision like below:
============================================
GSP> he


HE

==== GSP Help ============================================(Administrator)===
Hardware Revision 8 Firmware Revision A.01.10 May 24 2001,11:05:55

GSP Help System

Enter a command at the help prompt:
OVerview : Launch the help overview
LIst : Show the list of GSP commands
: Enter the command name for help on individual command
TOPics : Show all GSP Help topics and commands
HElp : Display this screen
Q : Quit help
====
GSP HELP:

Hope that helps
Regards,
You need to know a lot to actually know how little you know
jamshed
Frequent Advisor

Re: firmware revision

I mean server firmware revision
Michael Tully
Honored Contributor

Re: firmware revision

To see the CPU firmware:

# echo "selclass qualifier cpu;info;wait;infolog" | cstm
Anyone for a Mutiny ?
Cheryl Griffin
Honored Contributor

Re: firmware revision

Diagnostics can tell you that. Here is two other ways to obtain PDC rev level:
# mstm
select any processor and
tools--> information--> run

# cstm
map
sel dev
info
il

The line containing the firmware revision will similar to:
PDC Firmware Revision: 43.50
"Downtime is a Crime."