firmware

[Shah Gaurang B.]

Dear All,

How to check the firmware of my rp3440 and rp4440 servers .

Thanks in advance

[Torsten. · Accepted solution]

The best way is to log on to the MP and run

MP:CM> sysrev

this will tell you the version of MP, BMC and PDC.

[Marvin Strong]

enter the GSP ctrl-B on the console.

mp> cm
mp> sysrev

[Steven E. Protter]

Shalom,

You need to first connect to the console.

Then Ctrl-b

sysrev

Will display all this information.

Depending on your configuration, there are two ways to connect. If the console is on the network, you should be able to telnet in.

You could also do this with a serial connecttion to the console port on the systems.

SEP

[Michael Steele_2]

For PDC grep -i pdc /var/tombstones/ts99

For GSP, control b. Firmware version is display on the opening page.

For CPU, use - echo "selclass qualifier cpu;info;wait;infolog" | cstm