HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

gsp attention light

 
lawrenzo
Trusted Contributor

gsp attention light

hello,

We have several errors on a server gsp which is showing a yellow attn light.

How can we clear all the errors and reset the light?

Thanks
hello
9 REPLIES 9
RAC_1
Honored Contributor

Re: gsp attention light

Log onto gsp. Choose SL (chasis logs)
Check and it should go away.
There is no substitute to HARDWORK
lawrenzo
Trusted Contributor

Re: gsp attention light

yes we have doen that, how can we ack the alerts to make them disapear

thanks
hello
D Block 2
Respected Contributor

Re: gsp attention light

Anil (RAC) did mention that you must page all the Messages in the GSP..

also, read up on the: FRULED manpage, to turn off ALL cell and I/O chasis service LEDs.

Golf is a Good Walk Spoiled, Mark Twain.
Highlighted
Suraj Singh_1
Trusted Contributor

Re: gsp attention light

Hi,

Log on to GSP using Admin, select SL (Show Event Logs), Press E (System Event), Press T (View mode configuration - Text) and press Enter. Go through these logs, and you may find some event which require your immediate attention.) Once you have gone through these logs, the Yello attn. LED will go away, and it will turn Green.

HTH,
Suraj
What we cannot speak about we must pass over in silence.
Steven E. Protter
Exalted Contributor

Re: gsp attention light

From the Console

Ctrl-b

Enter through the authenticataion.

SL as shown above and the attention light will go off as you finish going through the items.

Take a moment to read them, they might give you a clue as to what happened.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Devesh Pant_1
Esteemed Contributor

Re: gsp attention light

I would really look through the logs before deleting them. However this is very common with the Superdomes. any simple log causes the red light alert flashing on the front panel.

Devesh
R.KrishnaKumar
Frequent Advisor

Re: gsp attention light

Login to GSP or Use Ctrl+B from console to got to GSP.

View the System log by giving the command SL.
also view the event log by giving the command E & T (for text view)

just scroll down and see for any errors, This should go off the LED's

regds..
Krishna
Hilary Nicholson
Frequent Advisor

Re: gsp attention light

As mentioned before, reading the error logs in the GSP will stop the light flashing.

I have also been tempted to paint over it as every time we reboot our server, the attention light comes back on!

Regards,

Hilary
Sandman!
Honored Contributor

Re: gsp attention light

Just my two cents after the voluminous posts:

1. Login to GSP thru the console or webconsole after typing Ctrl-b.
2. From the GSP prompt go to the SL menu
GSP> sl
3. Under the SL menu select option "e" for displaying the error logs.
4. Don't "Set up filter options on this buffer"
5. type "q" to quit the SL menu
6. type "co" to return to the console
GSP> co


enjoy!