HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

gsp superdome: cannot access to console in some nPars

 
Jose Agurto
Occasional Visitor

gsp superdome: cannot access to console in some nPars

Hello,
In superdome console cannot access to some nPars, when put ^cf this nPar don't respond and write [Bumped user - Admin.], after that it does not allow any action except control-b.
I try with control-q and control-s and don't work.
Others nPars work fine.

thanks in advance.
7 REPLIES 7
Robert_Jewell
Honored Contributor

Re: gsp superdome: cannot access to console in some nPars

From the GSP Main Menu, check on the status of those parititions using the VFP. It may be hung or down for some reason. If all else fails in trying to connect (try a ping to the nPar OS as well) you may have to issue an RS from the GSP CM:> to reset the nPar.

-bob
----------------
Was this helpful? Like this post by giving me a thumbs up below!
Jose Agurto
Occasional Visitor

Re: gsp superdome: cannot access to console in some nPars

thanks Bob,
I can connect to the vPars in the nPar by telnet, but i cannot connect to them by console, all vpars are working.

Robert_Jewell
Honored Contributor

Re: gsp superdome: cannot access to console in some nPars

Ah, I see now. Sorry, I am not overly familiar with vPars and how the system console would see them listed.

Hopefully you receive further help soon!

-Bob
----------------
Was this helpful? Like this post by giving me a thumbs up below!
Torsten.
Acclaimed Contributor

Re: gsp superdome: cannot access to console in some nPars

Can you toggle between the consoles using "CTRL a"?

If your current console is busy with a program at this moment (e.g. SAM is started with X output), you cannot see anyting unless the program has finished.
Try to connect (telnet) to the running vPar and find out if anything is running on "console".

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jose Agurto
Occasional Visitor

Re: gsp superdome: cannot access to console in some nPars

control-a doesn´t work, I connected by telnet to vPars and verify if any process run in console. Maybe the cell firmware or vPar software can be out of date??
Phil uk
Honored Contributor

Re: gsp superdome: cannot access to console in some nPars

Hi,
You may have accidentally pressed ctrl S when meaning to press ctrl A.
Pressing ctrl S can make the console appear to of hung.
Try pressing ctrl S again, this releases the console from its apparent hung state (if indeed this is the problem).
Jose Agurto
Occasional Visitor

Re: gsp superdome: cannot access to console in some nPars

I try with control-s and control-q and doesn't work either.